Switched Rack PDUFeatures & Benefits

Agility

Wide range of input and output connections

Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip.

Single input power source

Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.

Rack-Mountable

Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.

Availability

Integrates with StruxureWare Data Center Expert

An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network

Load indicator LED

Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.

Power Delays

Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.

Local Current Monitoring Display

The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)

Alarm Thresholds

Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)

Remote Individual Outlet Control

Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).

Network Management Capabilities

Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Flash Upgradeable

Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)

Marketing Features

Remote Individual Outlet Control

Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).

Remote Management Capabilities

Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Alarm Thresholds

Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.

Power Delays

Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.

Local Current Monitoring Display

The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.

Output

• Nominal Output Voltage
  208V , 230V
• Maximum Total Current Draw
  16
• Output Connections
  (8) IEC 320 C13 (Battery Backup)

Input

• Nominal Input Voltage
  200V , 208V , 230V
• Input frequency
  50/60 Hz
• Input Connections
  IEC-320 C20
• Cord Length
  2.5meters
• Acceptable Input Voltage
  200-240VAC
• Number of Power Cords
  1
• Load Capacity
  3680VA
• Maximum Input Current
  20A
• Regulatory Derated Input Current (North America)
  16A

Physical

• Maximum Height
  44mm , 4.4cm
• Maximum Width
  445mm , 44.5cm
• Maximum Depth
  108mm , 10.8cm
• Rack Height
  1U
• Net Weight
  2.27kg
• Shipping weight
  3.45kg
• Shipping Height
  70mm , 7.0cm
• Shipping Width
  470mm , 47.0cm
• Shipping Depth
  343mm , 34.3cm
• Color
  Black

Environmental

• Operating Environment
  0 - 45 °C
• Operating Relative Humidity
  0 - 95 %
• Operating Elevation
  0-3000meters
• Storage Temperature
  -25 - 65 °C
• Storage Relative Humidity
  0 - 95 %
• Storage Elevation
  0-15000meters

Conformance

• Approvals
  cUL Listed, CE, CSA, EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3, GOST, IRAM, MIC, UL 60950, UL Listed, VDE, VCCI
• Standard warranty
  2 years repair or replace

Sustainable Offer Status

• RoHS
  Compliant
• REACH
  REACH: Contains No SVHCs
• PEP
  Available in Documentation tab
• EOLI
  Available in Documentation tab
• Battery Directive
  Compliant
• Battery Notes
  ts_Battery_Notes
• ts_other_compliance_info
  China RoHS

Output

• Nominal Output Voltage
  208V , 230V
• Maximum Total Current Draw
  16
• Output Connections
  (8) IEC 320 C13 (Battery Backup)

Input

• Nominal Input Voltage
  200V , 208V , 230V
• Input frequency
  50/60 Hz
• Input Connections
  IEC-320 C20
• Cord Length
  2.5meters
• Acceptable Input Voltage
  200-240VAC
• Number of Power Cords
  1
• Load Capacity
  3680VA
• Maximum Input Current
  20A
• Regulatory Derated Input Current (North America)
  16A

Physical

• Maximum Height
  44mm , 4.4cm
• Maximum Width
  445mm , 44.5cm
• Maximum Depth
  108mm , 10.8cm
• Rack Height
  1U
• Net Weight
  2.27kg
• Shipping weight
  3.45kg
• Shipping Height
  70mm , 7.0cm
• Shipping Width
  470mm , 47.0cm
• Shipping Depth
  343mm , 34.3cm
• Color
  Black

Environmental

• Operating Environment
  0 - 45 °C
• Operating Relative Humidity
  0 - 95 %
• Operating Elevation
  0-3000meters
• Storage Temperature
  -25 - 65 °C
• Storage Relative Humidity
  0 - 95 %
• Storage Elevation
  0-15000meters

Conformance

• Approvals
  cUL Listed, CE, CSA, EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3, GOST, IRAM, MIC, UL 60950, UL Listed, VDE, VCCI
• Standard warranty
  2 years repair or replace

Sustainable Offer Status

• RoHS
  Compliant
• REACH
  REACH: Contains No SVHCs
• PEP
  Available in Documentation tab
• EOLI
  Available in Documentation tab
• Battery Directive
  Compliant
• Battery Notes
  ts_Battery_Notes
• ts_other_compliance_info
  China RoHS